Dometic PERFECTWALL PW 3800 Instructions De Montage page 11

PW3800
Legend to fig. g, page 2:
No. Description
1 Receiver
2 3 A fuse for LED awning light (optional)
3 og Orange line for D+ connection
4 rd Red line for LED awning light (optional)
5 bk Black line for LED awning light (optional)
6 bu Blue line for motor connection
7 bn Brown line for motor connection
8 bk Black line for power supply
9 rd Red line for power supply
10 Main switch
11 15 A fuse for main switch
➤ Connect the motor to the receiver in accordance with the applicable electrical
engineering regulations and the circuit diagram (fig. g, page 2).
➤ Find a suitable location inside the motor home, out of direct sunlight, to install the
holder for the remote control and the wall switch (accessory).
Programming the remote control
➤ Place the battery (see fig. h 1, page 2).
➤ Switch on the power supply.
✓ The receiver beeps once briefly.
➤ Press the programming button (fig. h 2, page 2) within 4 seconds.
✓ The receiver beeps once briefly.
➤ Press the programming button (fig. h 2, page 2) again briefly.
✓ The receiver beeps once briefly.
➤ Briefly press the button
✓ The receiver beeps four times briefly.
✓ The awning moves briefly.
EN
(fig. i 1, page 2).
Connecting the awning
11