Calibrage De La Balance - Baratza Forte-BG Manuel De Fonctionnement

Calibrage de la balance

If the display is showing "EEE", "out" or the grinder is over or under-dosing
coffee, the scale needs to be calibrated. To do this you need a 200g weight. To
"create" a 200g weight, place the Forté grounds bin on a separate scale and
add whole coffee beans until the scale reads 200g (combined weight of bin
and beans). Keep your "200g weight" handy. Now, unplug the Forté and make
sure there is nothing on the scale platform. Plug the Forté back in, and while
it powers on, hold buttons M and WEIGHT, until a value between 1500-3000 is
displayed. Then press button M, the display will read "cal". Gently set the 200g
weight onto the platform. The display will flash "pas" and then show the total
weight of the bin and coffee beans (it should read 200). After removing the
bin the screen will show 0.0. Empty the beans. Then press START to bring the
grinder to the "home screen". Then place the bin back on the scale and press
TARE. The scale is now calibrated. Please email us at support@baratza.com if
you have problems calibrating the scale.
Forte Manuel
TM
15