Disassembling Your Breville Juice Fountain - Breville Juice Fountain Classic Mode D'emploi

Operating your Breville Juice Fountain
Hint:
To minimize washing up we suggest you place a
plastic freezer bag (or plastic grocery bag) into the
Pulp Container to collect the pulp. When the juicing is
completed simply place the bag containing the pulp
into a bin. The bag may also prevent pulp from
spitting out of the pulp container. (Refer to page 19
for ideas on 'Using the pulp'.)
Do not allow the Pulp Container to overfill as
this may prevent correct operation or damage
the unit.
Note
Clean up tip:
For easy cleaning immediately after each use rinse
Juice Fountain removable parts under running water
(to remove wet sticky pulp). Then allow to air dry.
12

Disassembling your Breville Juice Fountain

continued
Step 1
Turn Juice Fountain 'OFF' at the power outlet
and unplug.
Step 2
Remove the Pulp Container by tilting the
Container slightly.
HINT:
To minimize
washing up place
a plastic freezer
bag into the Pulp
Container to
collect the pulp.
Step 3
Place both hands on either side of the Locking Arm,
lift arm upwards slightly and pull back.
2
3
THE STAINLESS STEEL FILTER BASKET CONTAIN, SMALL SHARP BLADES TO CUT AND PROCESS
FRUITS AND VEGETABLES.
DO NOT TOUCH BLADES WHEN HANDLING THE FILTER BASKET.
Step 4
Move the locking arm down.
4
Step 5
Lift off the Cover.
5
13