Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
US
HOW IT WORKS EPD200/EPD200-PRO
|
Your EDP Desiccant dehumidifier removes
moisture using a continuously rotating moisture
absorbing wheel —this 'Desiccant Rotor' is
literally a honeycomb of extremely hygroscopic
membranes.
A highly efficient yet low noise fan draws air
into the unit (Process Air) and forces it through
a portion of the absorbent rotor. As the air
passes through the rotor, the honeycomb of
hygroscopic membranes absorb almost all
of the moisture creating an extremely dry air
stream; this air stream is discharged directly
through the 'Dry Air Outlet'.
A second fan pushes a separate air stream
(Regen Air) through a heater bank (Regen
Heater) where it's temperature is raised. This
air is then channeled back through a section
of the rotor. As this air passes back through the
membranes, its higher temperature drives-
out the previously absorbed moisture and
discharges it as warm wet air through the 'Wet
Air Out' duct.
As the wheel rotates, this process of collecting
and discharging moisture is continuous.
5
Publicité
Table des Matières
