Niko 10-845 Information De Produit page 53

Mémoire vidéo centrale
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Log deleted, images in the folder
deleted
Invalid value (SN 1 unknown or
entry of a SN 2)
10.5. Setting delay time for automatic image recording
Start the programming
Enter value
Delay time is set
Invalid value
10.6. Setting number of images for automatic image recording
Start the programming
Enter a value
Number of images set
Invalid value
10.7. Setting video ExtU border
Start the programming
Set ExtU address
ExtU address set
Invalid value
10.8. Setting encryption
Start the programming
Enter a value
Encryption set
Invalid value
EN
A positive confirmation signal sounds. LED lights up yellow during 3 sec. After,
the yellow LED flashes.
On the SD card the log and folder with images is being deleted.
If you press #, a negative confirmation tone sounds. The yellow LED flashes
rapidly during 3 sec. and then flashes again.
If not already done.
*4 # value # value = 1 to 30 s (FI = 1 s)
A positive confirmation signal sounds. LED lights up yellow during 3 sec. After,
the yellow LED flashes.
After the set time has elapsed, images are recorded during an incoming door
call.
If you press #, a negative confirmation tone sounds. The yellow LED flashes
rapidly during 3 sec. and then flashes again.
If not already done.
*5 # value # value = 1 to 4 (FI = 1 s)
A positive confirmation signal sounds. LED lights up yellow during 3 sec. After,
the yellow LED flashes.
After a door call, the set number of images is stored, each time with a 1 sec
break in between.
If you press #, a negative confirmation tone sounds. The yellow LED flashes
rapidly during 3 sec. and then flashes again.
If not already done.
*6 # value # ExtU address = 0 to 63 (FI = 31)
A positive confirmation signal sounds. LED lights up yellow during 3 sec. After,
the yellow LED flashes.
Images of external units with video ExtU border ≤ the set value are recorded.
If you press #, a negative confirmation tone sounds. The yellow LED flashes
rapidly during 3 sec. and then flashes again.
If not already done.
*7 # value # (FI = 1)
= 0 images are saved as BMP file
= 1 image is stored by means of encryption
A positive confirmation signal sounds. LED lights up yellow during 3 s. After,
the yellow LED flashes.
If you press #, a negative confirmation tone sounds. The yel-low LED flashes
rapidly during 3 sec. and then flashes again.
10-845
4
5
6
7
53

Publicité

Table des Matières
loading

Table des Matières