RÉALISATIONDEVOTREPREMIERENREGISTREMENT
1.Branchez votre caméscope sur une source
d'alimentation. ➥page 17
(Un bloc de batteries ou un adaptateur
secteur AC) ➥page 14,17
•
Insérez une cassette. ➥page 34
•
Si vous voulez stocker les
enregistrements sur une carte
mémoire, insérez la carte mémoire.
(VP-D385(i) uniquement) ➥page 74
2.Retirez le cache-objectif.
3.Faites glisser l'interrupteur POWER vers le
bas pour éteindre l'appareil.
•
Déployez l'écran LCD.
•
Réglez l'interrupteur de sélection
sur CARD ou TAPE. (VP-D385(i)
uniquement)
•
Appuyez sur le bouton MODE pour
sélectionner le mode Camera(Cam)(
- Assurez-vous que le témoin STBYapparaît à l'écran.
•
Si le volet de protection en écriture de la cassette est ouvert (position
d'enregistrement), STOP et "Protection!"s'affichent à l'écran.
Refermez le volet de protection en écriture pour pouvoir enregistrer.
•
Assurez-vous que la scène que vous souhaitez enregistrer apparaît
sur l'écran LCD.
•
Assurez-vous que le voyant de la batterie indique qu'il reste assez
d'énergie pour la durée d'enregistrement prévue.
•
Vous pouvez sélectionner le mode d'enregistrement
de votre choix. ➥page 44
4. Pour commencer l'enregistrement, appuyez sur le
bouton Début/fin d'enregistrement.
•
"REC(ENR)●" s'affiche sur l'écran LCD.
Pour arrêter l'enregistrement, appuyez à nouveau
sur le bouton Début/fin d'enregistrement.
•
"STBY(PAUSE)" s'affiche sur l'écran LCD.
•
Éjectez le bloc de batteries une fois les enregistrements
terminés pour éviter toute consommation électrique non
nécessaire.
•
Le caméscope Mini-DV est doté de deux boutons Début/fin
d'enregistrement. L'un se trouve à l'arrière du caméscope
et l'autre se situe sur la façade LCD. Sélectionnez le bouton
adéquat selon l'utilisation en cours.
35_ French
MAKINGYOURFIRSTRECORDING
).
REC
SP
10Sec
16:9 Wide
No Tape !
1/50
M
29
W
1. Connect a power source to the
camcorder. ➥page 17
(A battery pack or a AC power adapter)
➥page 14,17
OPE N
•
Insert a cassette. ➥page 34
•
If you want to record on a memory
card, insert the memory card.
OPE N
(VP-D385( i ) only) ➥page 74
2. Remove the lens cover.
3. Slide the POWER switch downwards to
turn on the power.
•
Open the LCD screen.
•
Set the Selectswitch to CARD or
TAPE. (VP-D385( i ) only)
•
Press the MODE button to set
Camera(
- Make sure that STBY is displayed.
•
If the write protection tab of the cassette is open (set to save),
STOP and "Protection!" will be displayed. Release the write
protection tab to record.
•
Make sure the image you want to record appears on the LCD screen.
•
Make sure the battery level indicates that there is enough
remaining power for your expected recording time.
•
You can select a record mode of your choice.
0:00:00
➥page 44
60min
4. To start recording, press the Recordingstart/stop
16Bit
S
button.
•
"REC●" is displayed on the LCD screen.
To stop recording, press the Recordingstart/
stop button again.
T
•
"STBY" is displayed on the LCD screen.
•
Eject the battery pack when you finish the recordings to
prevent unnecessary battery power consumption.
•
The miniDV camcorder provides two Recordingstart/stop
buttons. One is on the rear side of the camcorder and
the other one is on the LCD panel. Select the Recording
start/stop button according to the use.
).
English _35