Compliance With Standards - Philips StyleShaver QS6161 Mode D'emploi

- If the appliance is subjected to a major change in temperature, pressure
or humidity, let the appliance acclimatise for 30 minutes before you use it.
- If the adapter or the charging stand is damaged, always have it replaced
with one of the original types in order to avoid a hazard.
- Do not use the appliance if the shaving head or one of the trimming
combs is damaged or broken, as this may cause injury.
- This appliance is only intended for trimming and dry shaving facial hair
(beard, moustache and sideburns).

Compliance with standards

- The appliance complies with the internationally approved IEC safety
regulations and can be safely used in the bath or shower.
- This Philips appliance complies with all applicable standards and
regulations regarding exposure to electromagnetic fields.
Charging
QS6161 only: Charging normally takes approx. 1 hour.
QS6141 only: Charging normally takes approx. 4 hours.
When the appliance is fully charged, it has an operating time of 75 minutes.
Battery status indicator:
- When the battery status indicator flashes white, the battery is charging.
- When the battery status indicator lights up white continuously, the
battery is fully charged. This indication is shown for 30 minutes. Then
the battery status indicator goes out.
- When the battery status indicator flashes orange, the battery is almost
empty (approx. 10 minutes of operating time left).
- When the battery status indicator flashes orange quickly, the battery is
empty. You have to charge the appliance before you can use it again.
Note: The appliance can only be charged in the charging stand.
1 Insert the small plug into the charging stand.
Note: The small plug is easiest to insert when the charging stand is folded.
2 Unfold the charging stand ('click').
3 Put the adapter in the wall socket.
4 Put the appliance in the charging stand.
ENGLISH
7