Overload Protection; Cleaning And Maintenance - Philips StyleShaver QS6161 Mode D'emploi

ENGLISH
14

Overload protection

If you press the trimming head or shaving head too hard onto your skin
or if its cutters gets blocked (e.g. by clothes etc.), the on/off button of the
blocked trimming head or shaving head flashes quickly (QS6161 only) and
the appliance switches off automatically. Remove whatever is blocking the
cutters before you use the appliance again.

Cleaning and maintenance

Clean the appliance after every use.
Never use compressed air, scouring pads, abrasive cleaning agents or
aggressive liquids such as petrol or acetone to clean the appliance.
Only clean the appliance and the adapter with the cleaning brush
supplied.
Note: The trimming head and shaving head do not need any lubrication.
Cleaning the trimming head
1 Switch off the appliance.
2 Pull the comb off the trimming head.
3 Clean the trimming head under the tap.
Cleaning the trimming head connector
Note: Make sure that you clean the trimming head connector at least once
every three months.
1 Switch off the appliance.
2 Gently pull the trimming head off the appliance.