Operation And Maintenance; Operation With The Wired Control Point; Operation With A Io-Homecontrol; Control Point - SOMFY S&SO-RS100 io HYBRID Notice

Masquer les pouces Voir aussi pour S&SO-RS100 io HYBRID:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
EN

3. OPERATION AND MAINTENANCE

This drive does not require any maintenance operation.

3.1. OPERATION WITH THE WIRED CONTROL POINT

3.1.1. Up
and Down
A press on
or
-
the way up or all the way down.
Depending on the type of control point, you may need to
hold down or release the button.
3.1.2. STOP function
The roller shutter is moving.
Depending on the type of control point:
• Release the
stops automatically.
• Briefly press the
stops automatically.
3.2. OPERATION WITH A IO HOMECONTROL
If no io-homecontrol
®
professional.
Λ
3.2.1. Up
and Down
Λ
A brief press on
or
all the way up or all the way down.
3.2.2. STOP function
The roller shutter is moving.
my
Briefly press the
-
automatically.
3.2.3. Favourite (my) position
An intermediate position called "favourite position (my)" other than the fully up or fully down
position is programmed by default in the S&SO-RS100 io HYBRID.
Perform 2 complete
-
to activate the favourite position.
To modify or delete the favourite position (my), see Additional settings section.
To use the favourite (my) position:
The roller shutter is stopped.
-
my
Briefly press
: the roller shutter moves and stops in
-
the favourite position (my).
3.2.4. Operation with a Somfy io-homecontrol
Refer to the corresponding sensor guide.
3.2.5. Feedback
A er each order, the S&SO-RS100  io HYBRID sends a io-homecontrol
This information is processed by the io-homecontrol
62
Copyright © 2014 - 2016 Somfy SAS. All rights reserved.
buttons
causes the roller shutter to move all
or
  button: the roller shutter
Stop
  button: the roller shutter
control point is programmed: contact a home motorisation and automation
V
buttons
V
causes the roller shutter to move
  button: the roller shutter stops
Λ
V
or
cycles as far as the upper and lower end limits of the roller shutter

CONTROL POINT

®
sun sensor (such as Sunis WireFree™ io)
®
two-way control points.
®
my
my
radio message.
®
Non contractual images.

Publicité

Table des Matières
loading

Table des Matières