Prior Information; Sphere Of Application; Liability - SOMFY S&SO-RS100 io HYBRID Notice

Masquer les pouces Voir aussi pour S&SO-RS100 io HYBRID:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
EN
The S&SO-RS100 io HYBRID is a new generation drive designed to offer improved convenience and
safety for users and greater simplicity for installers when setting up due to optimal adaptability of
the drive to roller shutters (default Plug&Play drive, for which settings may be adapted depending
on the equipment level of the roller shutter).
This "hybrid" drive enables control via a wired control point as well as via io-homecontrol
points or sensors in the same installation, making it the perfect solution for new build homes.
It offers innovative functions thanks to the new SMS technology (Smart Motion System) accessible
via the io-homecontrol
the Smoove RS100 io control point developed exclusively for drives using SMS technology.

1. PRIOR INFORMATION

1.1. SPHERE OF APPLICATION

The S&SO-RS100 drives are designed to motorise all types of roller shutters.
The installer, a home motorisation and automation professional, must ensure that once the driven
product is installed, it respects the current standards in the country of installation notably
the standard EN 13659 on roller shutters.

1.2. LIABILITY

Before installing and using the drive, please read these instructions carefully. In addition to
the  instructions provided in this guide, please also comply with the instructions set out in
the enclosed document Safety instructions.
The drive must be installed by a home motorisation and automation professional, in accordance
with Somfy's instructions and the applicable regulations in the country of installation.
Any operation of the drive outside the sphere of application described above is prohibited.
Such operation shall exclude Somfy from all liability and invalidate the Somfy warranty, as will any
failure to comply with the instructions given herein and in the enclosed Safety instructions document.
A er installing the drive, the installer must inform his customers of the operating and maintenance
conditions for the drive and must pass the operating and maintenance instructions on to them,
as  well as the enclosed Safety instructions document. Any A er-Sales Service operation on
the drive requires intervention by a home motorisation and automation professional.
Should any doubt arise during installation of the drive or for additional information, consult a Somfy
contact or visit www.somfy.com.
Safety warning!
"Up" button (wired control)
"Down" button (wired control)
50
Copyright © 2014 - 2016 Somfy SAS. All rights reserved.
installation tool Set&Go io. These functions are also accessible via
®
Caution!
Information
Λ
"Up" button (io-homecontrol
V
"Down" button (io-homecontrol
 control
®
control)
®
®
control)
Non contractual images.

Publicité

Table des Matières
loading

Table des Matières