EN
3. OPERATION AND MAINTENANCE
This drive does not require any maintenance operation.
If no io-homecontrol
®
professional.
3.1. UP AND DOWN BUTTONS
Λ
V
A brief press on
or
the way up or all the way down.
3.2. STOP FUNCTION
The roller shutter is moving.
my
Briefly press the
-
automatically.
3.3. FAVOURITE my POSITION
An intermediate position called "favourite position (my)" other than the fully up or fully down
position is programmed by default in the S&SO-RS100 io.
Perform 2 complete
-
to activate the favourite position.
To modify or delete the favourite position (my), see Additional settings section.
To use the favourite (my) position:
my
Briefly press
: the roller shutter moves and stops in
-
the favourite position (my).
3.4. OPERATION WITH A SOMFY io-homecontrol
SUCH AS SUNIS WireFree™ io
Refer to the corresponding guide.
3.5. FEEDBACK
The S&SO-RS100 io sends a message a er each order. This information is processed by
the io-homecontrol
two-way control points.
®
3.6. ADDITIONAL SETTINGS
3.6.1. Modification of the favourite position (my)
Set the roller shutter to the desired favourite position
1)
(my).
my,
for ≈ 5 s, until there is back and forth
Press
2)
movement by the roller shutter: the desired favourite
position (my) is now programmed.
3.6.2. Deleting the favourite position (my)
my
Press
: the roller shutter moves and stops at
1)
the favourite position (my).
my
Press
again until the roller shutter moves:
2)
the favourite position (my) is deleted.
3.6.3. Adding/Deleting Somfy io-homecontrol
Refer to the corresponding guide.
34
Copyright © 2014 - 2016 Somfy SAS. All rights reserved.
control point is programmed: contact a home motorisation and automation
causes the roller shutter to move all
button: the roller shutter stops
Λ
V
or
cycles as far as the upper and lower end limits of the roller shutter
SUN SENSOR
®
1)
1)
control points and sensors
®
my
my
2)
my
2)
my
Non contractual images.
my
my