Philips S5000 Série Mode D'emploi page 36

ENGLISH
36
Problem
The shaver is
not entirely
clean after I
clean it in the
SmartClean
system.
Water is leaking
from the
bottom of the
shaver.
Possible cause
The shaving unit is
soiled or damaged
to such an extent
that the motor
cannot run.
You have not
placed the shaver in
the SmartClean
system properly, so
there is no electrical
connection between
the SmartClean
system and the
shaver.
The cleaning
cartridge is empty.
The replacement
indicate you have to
replace the cleaning
cartridge.
You have used
another cleaning
original Philips
cleaning cartridge.
During cleaning,
water may collect
between the inner
body and the outer
shell of the shaver.
symbol flashes to
fluid than the
Solution
Clean the shaving heads or
replace them (see chapters
'Cleaning and maintenance'
Press down the top cap
connection between the
shaver and the SmartClean
system.
Place a new cleaning
cartridge in the SmartClean
system (see chapter 'Cleaning
Only use the original
Philips cleaning cartridges.
This is normal and not
dangerous because all
electronics are enclosed in a
sealed power unit inside the
shaver.
and 'Replacement').
('click') to ensure a proper
and maintenance').