Adjust Speed; Use Blender; Ingrediens Refill - Exquisit MU 3001 we Instructions

EN

17.1 Adjust speed

The speed control is used to
select between two speed levels
"1" and "2" a pulse level "P" as
well as to turn off the blender,
level "0".
• Start the mixing process at
the lowest speed "1".
• Later set the speed on the
higher level.
• You turn off the blender, if you
set the speed control to the
"0" level.
• If you set the speed control to
the pulse level "P", you are
using the pulse function. Refer
to the section "Pulse function".

17.2 Use blender

To facilitate the handling of the
blender, the blender container 3
is provided with level markings.
The numbers indicated there
refer to the respective level in
milliliters. The lowest mark has
no level indication. It corresponds
to a level of 250 ml.
Operate the blender with at least
250 ml of liquid.
Do not fill more liquid in the
blender as the 1500 ml mark
"MAX".
Always cut solid ingredients
before adding it in the bowl in
small pieces so you prevent
jamming of the knives. If you
want to process solid and liquid
ingredients to the blender at the
same time, first enter the liquid
ingredients into the mixing bowl
and mix the ingredients.
Then enter the solid, finely
chopped ingredients, and
continue the mixing process. In
order to obtain the structure of
page | 26
the food, it is best to do the
mixing process in a few seconds.
1. Assemble the blender jug onto
the drive unit as described in
"Compose blender".
2. Remove the safety cover by
turning it counter-clockwise,
until you can take it off.
3. Fill the desired ingredients into
the blender jug.
4. Close the jug with the security
cover.
5. Make sure that the speed
control is set to "0".
6. Connect the blender to a
properly installed socket.
7. To start the mixing process,
turn the speed control slowly
up, until the desired speed is
reached.
8. To stop mixing for a while,
turn the speed control to level
"0".
9. Wait for a complete stop of
the blades before you take the
safety lid off.

17.3 Ingrediens refill

During the current mixing
process you can add other
ingredients.
1. Turn the lid insert counter-
clockwise until it stops and
take it out.
2. Fill ingredients through the
filler or add small amounts of
liquid.
3. Use the lid insert to refill other
ingredients.
Use the cover as a measuring
cup. It is suitable for measuring
30 ml, 40 ml and 50 ml of liquid.
1. Close the safety cover 2 with
the lid insert.
2. Turn the lid insert clockwise
until it clicks.