Kohler K-8501 Guide D'installation Et D'entretien page 7

Increase the Water Flow
Plate
Plaque
Placa
Notch
Encocher
Muesca
Perform the following steps without water flow.
Insert the tool (provided) into the housing, then turn the tool counterclockwise to
loosen the housing.
For Invigorating Models:
Remove the housing, gasket, plate, and rotor.
Inspect the components for debris and mineral-buildup. Clean or replace parts as
needed.
Insert the rotor on the pin of the backside of the housing. Reinstall the plate and
gasket onto the housing.
For Relaxing Models:
Remove the housing, gasket, plate, and aerator.
Inspect the components for debris and mineral-buildup. Clean or replace parts as
needed.
Reassemble the aerator to the housing by aligning the notches on the aerator
aligned with the keyways of the backside of the housing.
For All Models:
Reinstall the plate and gasket onto the housing.
Using the tool, reinstall the housing into the handshower.
Kohler Co.
Gasket
Plate
Joint
Plaque
Empaque
Placa
Invigorating
Revigorante
Vigorizante
Relaxing
Relaxante
Aerator
Relajante
Aérateur
Aireador
Housing
Logement
Alojamiento
7
Rotor
Rotor
Housing
Rotor
Logement
Alojamiento
Tool
Outil
Herramienta
1085975-2-C