Wellis Coyote Guide D'utilisation page 15

Cleaning the Stainless Steel and Polishing
1. Allow side burner to cool before cleaning/polishing stainless steel. Do not
clean or polish your side burner's stainless steel when the gill is in opera-
tion or still hot.
2. To clean the stainless steel, wash off all dirt and debris from the steel with
warm water. If you have tough spots to clean, then a third-party degreaser
product can be used.
3. Next, rinse and dry the steel thoroughly with a clean towel. Do not allow
the steel to air dry as the standing water can cause surface discoloration.
4. The last step is to protect to the unit with a good third-party polish. There
are several third-party polishes on the market that will help keep your
side burner protected from the elements for a longer period. Most of
these polishes are toxic, so only use these on the exterior of the side
burner. Follow instructions provided on any third-party polish products.
Apply the polish to a clean paper towel and wipe with the direction of the
grain in the stainless steel.