Wellis Coyote Guide D'utilisation page 13

Install Propane Tank
Instructions on using the Side Burners Built-In Ignition System:
1. Open the canopy.
2. Select the burner that you want to
ignite. Push and rotate the knob
corresponding to that burner coun-
terclockwise to the "High" position.
3. At "High" position, the spring inside
the valve will build up energy to
create the spark. Once you hear a
click, the igniter has fired the spark
for that burner.
4. Turn the keeping pushing for at least 10 – 15 seconds as gas will go
through the manifold, interact with the sparks and ignite the side burner.
5. If the side burner does not ignite at the first attempt, try again immediately
but be very aware of any gas building up inside the side burner. NEVER
operate the side burners indoors or in any type of enclosed area, such as
a garage, shed or breezeway. Keep clear of trees and shrubs. The side
burners are not intended for installation in or on recreational vehicles, port-
able trailers, boats or any other moving installation.
6. If the side burner does light after three consecutive attempts, turn the knob
to the "Off" position and keep the canopy open. Allow the side burner to
clear of any remaining gas in the manifold and restart the process.
7. NEVER use indoors or in any type of enclosed area, such as a garage,
shed or breezeway. Keep clear of trees and shrubs. The side burners are
not intended for installation in or on recreational vehicles, portable trailers,
boats or any other moving installation.
8. Visually check the burner flame. Qualified Flame is attached.
Safety tips for using your Burners
All cleaning and maintenance should be done only when grill is cool & with the
fuel supply turned off at the cylinder or source.