Adventys IE2 600 Mode D'emploi page 19

Smtlili probliema tnd their remediea
You doubt that your appliance is working properly. This does not necessarily mean that there is a prob-
lem. In all cases, check the following points:
ERROR CODE
Hi. U
ER 03
ER 15
ER 21
ER 09
Other (ER XX)
Keyboard off
Does not work
Whtt'a htppening
Faulty electrical connection voltage> 275 V
Overheating from below the glass ceramic
Device safety linked to a poor quality
of cookware
Incorrect electrical connection or drop in
supply voltage <207 V
Product failure
Overheating of the product
The appliance is not powered.
The power supply or the connection is defec-
tive.
The safety fuse is out of order.
To do
Make the connection of the device compliant
(Voltage greater than or equal to 230V +/- 10%)
Cool the top of the unit to clear the error, other-
wise contact customer service
Turn off the product and change the cookeware to
clear the defect
Conform to the connection of the device (Higher
tension than or equal to 230V +/- 10%)
Switch off and on the product, if persistent fault,
contact customer service
Unplug the product and let cool for 10 minutes.
Turn on the product and check the condition of
the filter.
Inspect the fuse on the unit.
Inspect the fuse and breaker of the electrical ins-
tallation
19