Using The Appliance - Philips HR1581/10 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

safety system switches off the appliance. Switch off and unplug the
appliance. Let the appliance cool down for 30 minutes before you continue
to use it.

using the appliance

1
Insert the beaters or kneading hooks into the mixer ('click'). You may
need to turn them slightly while you do this (Fig. 2).
Note: Insert the kneading hook or the beater with the collar into the larger
opening in the bottom of the mixer.
2
Put the plug in the wall socket.
Note: Always check if the speed selector is in 0 position before you plug in the
mixer.
3
Put the ingredients in a bowl.
See the table below for the recommended quantities and processing times.
Quantities and processing times
Kneading hooks*
Quantity (max.)
Yeast dough
500g flour
*) Select Turbo
Beaters*
Quantity (max.)
Batters for waffles,
750g
pancakes, etc.
Thin sauces, creams and
750g
soups
Mayonnaise
3 egg yolks
Pureeing potatoes
750g
Whipping cream
500g
Beaters*
Whisking egg whites
Cake mixture
*) Start mixing at a low speed to avoid splashing. Slowly increase the speed
later.
4
5
-
-
-
Time (max.)
6
3 minutes
7
Time (max.)
Always unplug the appliance before you clean it.
3 minutes
Never immerse the motor unit in water or rinse it under the tap.
1
3 minutes
2
15 minutes
3 minutes
3 minutes
1
2
Quantity (max.)
5 egg whites
750g
Lower the beaters or kneading hooks into the ingredients.
Set the speed control to the desired speed to switch on the
appliance (Fig. 3).
You can use the turbo setting to mix more quickly or to increase the
speed during heavy jobs, e.g. kneading yeast dough.
If you want to stop mixing for a while, set the speed control to '0' to
switch off the mixer. Then put the mixer (with the beaters or kneading
hooks still attached) on its heel until you continue.
It is recommended to use the turbo speed for mixing sponge cake and
egg white.
When you have finished mixing, set the speed control to '0' and unplug
the appliance.
Pull up the eject lever to eject the beaters or kneading hooks (Fig. 4).
cleaning
Clean the beaters and kneading hooks in warm water with some
washing-up liquid or in the dishwasher.
Clean the motor unit with a moist cloth.
storage
Wind the cord round the heel of the appliance. (Fig. 5)
Fix the cord with the cord clip
EnglisH
7
Time (max.)
3 minutes
3 minutes

Publicité

Table des Matières
loading

Table des Matières