Manual Operation - Perry DECRNN032 Mode D'emploi

6 - ENERGY SAVING FUNCTIONS

6.2 - MANUAL OPERATION

There are 2 manual modes, both of which have the effect of suspending
the current program:
A) Temporary manual operation
Briefly press : the
F temperature level will be applied to the remaining hours of the day (fig.23).
Set the desired temperature for when in manual mode by pressing
set the desired temperature by pressing the
The temporary manual mode will automatically
current day.
A shorter time can be set as follows:
Press OK (fig.24) and the number of hours that the temporary manual mode will
be active for will blink on the display. Set the desired duration with the
then press OK to confirm. Once the set number of hours passes, it will return to
the set program .
To exit from the temporary manual mode and return to the set program, press
again: the thermal scale of the current day will show on the display,
according to the program in operation before the temporary manual mode was
activated.
B) Permanent manual operation
Press and hold the
permanently (4 seconds approx.); the current temperature level will be applied to
all hours of the day (fig.25).
Select the temperature level desired by pressing
desired temperature by pressing the
Permanent manual operation remains active
mode and return to automatic operation, (program) press
44
symbol will blink on the display and the current
keys.
terminate at midnight of the
button until the symbol remains on the display
t1, t2, t3
keys.
indefinitely
t
2
t1, t2, t3 or t ;
/ DAY
R
fig. 23
t
2
keys,
/
DAY
R
fig. 24
t
2
or t and set the
; to deselect manual
.
/
DAY
R
fig. 25
2
DAY
. .
. .
. .
Manual operation
t1
t2
t3
0 2 4 6 8 10 12 14 16 18 20 22
½ h OK C
/
PROG
2
DAY
. .
. .
. .
t1
t2
t3
0 2 4 6 8 10 12 14 16 18 20 22
½ h OK C /
PROG
Keep pressed for 4 sec.
2
DAY
. .
. .
. .
t1
t2
t3
0 6 8 10 12 14 16 18 20 22
2 4
½ h
OK C /
PROG
°
C t
/
°
C
/ t
°
C
/ t