Lubrication Specifications (Workshop Work); Lubricants; Greasing Points - Alpego PUMA PF Série Manuel D'utilisation Et Entretien

OWNER'S MANUAL OF THE MULCH CULTIVATOR PF-PD

8.2. LUBRICATION SPECIFICATIONS (WORKSHOP WORK)

Grease all lubricating nipples (keep seals clean).
Lubricate/grease the machine at the specified intervals. Lubrication points on the machine are indicated with the foil.
Carefully clean the lubrication points and grease gun before lubrication so that no dirt is pressed into the bearings.
Press the dirty grease out of the bearings completely and replace it with new grease.

8.2.1. LUBRICANTS

For lubrication work, use a lithium saponified multipurpose grease with EP additives:
ARAL Aralub HL 2 Aralub HLP 2
FINA Marson L2 Marson EPL-2
ESSO Beacon 2 Beacon EP 2
SHELL Ratinax A Tetinax AM
For hydraulic system it is to use only multifunctional oils as:
Packelo UTO FLUID ISO 100
OMV AUSTRO MATIC LVX
Shell DONAX TD SAE 10/30
Mobil Mobil FLUID 424

8.3. GREASING POINTS

PF 300 PF 350
Figure 8-1
N. Greasng points
1 Roller bearings
2 Working depth adjustment system
3 Disc bar
Copyright ©2009 della Alpego spa® - All rights are reserved. Reprinting or unauthorized use of this manual is strictly forbidden without written permission by Alpego spa
Old Cod.Q00A00142
New Cod. MANT2010/00493 R.1
Q.ty
2
1
2
MAINTENANCE
- 32