Intended Purpose; General Description; Scope Of Delivery; Functional Parts - Grizzly TRP 350 K Traduction De La Notice D'utilisation Originale

Intended purpose

The rain barrel pump is intended for
pumping water from a rainwater butt or
rainwater collecting tank. It is particularly
suitable for watering plants in the garden.
This device is not suitable for commercial
use. Commercial use will invalidate the
guarantee.
Use of the pump for pumping aggressive,
abrasive, corrosive, inflammable (e.g. mo-
tor fuels) or explosive liquids, salt water,
cleaning agents and foodstuffs is prohib-
ited. The temperature of the liquid to be
pumped must not exceed 35°C.
The operator or user is responsible for ac-
cidents or damage to other people or their
property.
The manufacturer is not liable for any
damage caused by infringement of the
conditions of use or incorrect operation.

General description

The illustration how to handle the
appliance can be found on the
pages 2-3.

Scope of Delivery

Carefully unpack the appliance and check
that it is complete. Dispose of the packag-
ing material correctly.
- Fully assembled pump
- 2 aluminium tubes
- Aluminium tube with plastic hook
- Flexible tube with shut-off valve
- 4 sealing rings (already mounted)
- Cable clip
- Instruction Manual

Functional parts

Pump
1 Carrying handle
2 Pressure connection, pump
3 Float switch cable
4 Float switch height-adjustment
5 Float switch guide
6 Floating switch
7 Filter (not shown)
8 Suction foot
9 Pump housing
10 Push-on ports for aluminium
tubes
11 Mountings for aluminium tubes
12 Power supply cable/lead
Accessories
13 Bottom aluminium tube
14 Middle aluminium tube
15 Aluminium tube with plastic hook
16 Height adjustment screw
17 Pressure connection for garden
hosepipe
18 Shut-off tap
19 Cable clips
20 Flexible tube
21 1 large sealing ring (already
mounted)
22 Hook for suspending the pump
23 3 small sealing rings (already
mounted)
24 Cover cap

Functional description

The pump is fitted with a floating switch
which automatically cuts the pump in or
out, according to the water level. In the
case of an overload, the pump is cut out
by the built-in thermal protection switch.
When the motor has cooled down, it will
restart again on its own.
GB
17