Refrigerator Maintenance; Gas Flame Appearance; Remove And Clean The Burner Orifice - Norcold N180.3 Serie Manuel D'utilisation

Refrigerator Maintenance

Gas flame appearance:

While operating in propane gas mode, examine the appearance of the gas flame:
- Push and turn the gas control to the "HI" position.
- Open the lower intake vent.
The burner box cover can be hot. Wear gloves to avoid burns.
!
CAUTION
- Open the burner box door [165] and look at the gas flame [75] (See Art00955 and
Art02585).
The flame should be:
- a darker blue color on the inside of the flame and a lighter blue color on the
outside of the flame.
- a constant shape without flickering.
- Contact your dealer or Norcold authorized service center if the flame is:
- yellow
- flickering or changing shape.
- If the flame is yellow or has an erratic and unstable shape, contact your dealer or
Norcold authorized service center.
- Make sure the flame does not touch the inside of the flue tube [76].
- If the flame touches the inside of the flue tube, contact your dealer or Norcold
authorized service center.
- Close the burner box door.

Remove and clean the burner orifice:

NOTICE
Your dealer or Norcold authorized service center must do this procedure.
To remove and clean the burner orifice:
- Close the valve at the gas tank(s).
- Push and turn the gas control to the off (
- Turn the selector switch to the OFF position (
- Open the lower intake vent.
!
The burner box cover can be hot. Wear gloves to avoid burns.
CAUTION
- Remove the burner box cover by removing one screw.
To avoid possible propane gas leaks, always use two wrenches
!
WARNING
to loosen and tighten the gas supply line at the refrigerator's
manual shut off valve.
- Remove the flare nut from the orifice assembly [77] (See Art00956).
Owner's Manual 10
) position.
).
76
Art00955
165
ART 02585
80 78
77
79
Art 00956
75
167