Philips S5000 Série Mode D'emploi page 11

- The appliance is equipped with a replacement
reminder which reminds you to replace the
shaving heads. The replacement reminder lights up
continuously.
Note: After replacing the shaving heads, you need to
reset the replacement reminder by pressing the on/off
button for 7 seconds.
The appliance is equipped with a Turbo or Turbo+
setting. This setting is intended for quicker and more
intense shaving and makes hard-to-reach areas easier
to shave.
Activating the Turbo setting
1 To activate the Turbo setting, press the Turbo
button once.
Deactivating the Turbo setting
1 To deactivate the Turbo setting, simply press
the Turbo button once again.
Charging
Charging takes approx. 1 hour.
Note: This appliance can only be used without cord.
time and when the display indicates that the battery
is almost empty.
Turbo setting (specific types only)
Charge the shaver before you use it for the first
ENGLISH
11