Instructions For Installing The Exhaust Pipe - Klarstein 10032301 Manuel D'utilisation

Masquer les pouces Voir aussi pour 10032301:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

INSTRUCTIONS FOR INSTALLING
THE EXHAUST PIPE
The following rules must be strictly adhered to in order to achieve optimal air extraction:
• Make sure that the exhaust pipe is as short and straight as possible.
• Do not reduce the size and do not restrict the exhaust pipe. When using exhaust
pipes, the pipe must always be laid tightly in order to minimize the pressure loss.
• Failure to follow these basic instructions will reduce performance and increase the
noise level of the cooker hood.
• All installation work must be carried out by a qualifi ed electrician or other qualifi ed
person.
• Do not connect the exhaust pipe of the hood to an existing ventilation system that is
used for another unit, such as a ventilation system, such as a fl ue, gas pipes or hot
air pipes.
• If the exhaust pipe makes a bend, the angle of the exhaust pipe should not be
less than 120 °. Never align the exhaust pipe downwards, but always align it
horizontally or guide the pipe from the starting point upwards to the air outlet on the
outer wall.
• After installation, make sure that the cooker hood is horizontal so that no grease
can accumulate.
• Make sure that the exhaust pipe selected for the installation complies with the
relevant standards and is fi re resistant.
CAUTION
Risk of injury. For safety reasons, use only the size of fi xing or mounting
screws recommended in this manual. Failure to follow these instructions
may result in injury or electric shock.
EN
23

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

1003230210032303

Table des Matières