Installing The Cooker Hood - Klarstein FULL HOUSE 2.0 Mode D'emploi

EN
48
• If the cable is damaged or to be replaced, the operation must be carried out the by
after-sale agent with dedicated tools to avoid any accidents.
• If the appliance is being connected directly to the mains an omnipolar circuit-
breaker must be installed with a minimum opening of 3mm between contacts.
• The installer must ensure that the correct electrical connection has been made and
that it is compliant with safety regulations.
• The cable must not be bent or compressed.
• The cable must be checked regularly and replaced by authorised technicians only.

INSTALLING THE COOKER HOOD

Overview
1
Upper cover
2 Aluminium filters
3
Induction cooker
4 Support plate for the plastic tube
5
Plastic pipe
6
Air outlet
7 Adapter (round to square)
8
Plastic pipe
9 Activated carbon filter