Installation; Prepare For Installation - Klarstein 10029984 Mode D'emploi

Prepare for installation

If you have an outlet to the outside, your cooker hood can be con-
1
nected As below picture by means of an extraction duct (enamel, alu-
minum, flexible pipe or inflammable material with an interior diameter
of 150mm).
2
Before installation, turn the unit off and unplug it from the outlet.
The cooker hood should be placed at a distance of 65~75cm above
3
the cooking plane for best effect.
Installation (vent outside):
1
Drill 3 holes to accommodate the bracket. Screw and tighten the bracket onto the wall with the screws
& wall plugs provided.
17

Installation