Elba 106 EX 880 Mode D'emploi page 67

b) grill burner
– Unscrew and remove the burner secur-
ing screw "C" (fig. 10.11).
– Slacken screw "D" (fig. 10.11).
– Move the burner in the manner shown
in figure 10.12.
Take care not to damage the wire to
the ignition electrode and the safety
valve probe.
– Using a 10 mm box spanner, unscrew
the injector (indicated by the arrow
in fig. 10.12) and replace with a new
injector selected in accordance with
the 'Injector Table'; then replace the
burner repeating the above steps in
reverse order.
Fig. 10.11
C
Fig. 10.12
D
67