If you wish to reset the key to default, the procedure is as follows:
1.
2.
3.
4.
The key is now reset.
APP SHORTCUT KEYS
The Essential remote features three App Shortcut Keys which can be
used to open apps on your Smart Devices. If your original remote
control has a Netflix, Amazon Prime Video or YouTube key, these keys
will perform the same function.
However if you did not have a key like this, but still had the ability
to watch a streaming service, you can use this key as a shortcut by
programming a macro on it. Most AV devices which are connected to
the internet, such as Smart TVs or streaming Set Top Boxes have one or
more applications they can run to access TV viewing via the internet.
Examples of these would be Netflix, YouTube, Amazon Prime or similar.
To program the macro, you first need to know the device you use to
access the service, and then the sequence of keys you need to press to
always bring up the service you prefer, For example, some Panasonic
TVs will start Netflix by pressing the Apps key, then Menu Down Twice,
and finally the OK key. Or on an Apple TV, the sequence is Menu, Menu
Down and OK.
Once you have determined the sequence for your device, follow these steps:
1.
2.
3.
4.
5.
712832 Essential-4 CAN_Manual URC3640 RDN1111220 incl. Codelist.indd 12
712832 Essential-4 CAN_Manual URC3640 RDN1111220 incl. Codelist.indd 12
Press the device key you have programmed the
shortcuts on (for example STB).
Hold down the SETUP key and the key you wish
to reset (for example the Green key) until the LED
blinks twice.
Press and release the key to reset (for example the
Green key).
Hold down the SETUP key until the LED blinks
twice.
Sit in front of your device with it switched on (not on standby)
Hold down the App Shortcut key until the LED
blinks twice.
Press the device key for the device you want to use
for the macro (e.g. Stream)
Now perform the sequence of keys exactly as you would
normally to start your streaming service. The remote will
operate your device and the macro is recorded in real time - so
if it normally takes a few seconds for your device to react don't
worry.
Once you have finished the sequence - and the
Streaming Service has started on your device - hold
down the App Shortcut key until the LED blinks
twice and goes out. The macro is now stored.
12
11-12-2020 12:13
11-12-2020 12:13