Koala Kare KB310-SSRE Consignes D'installation page 6

KB310-SSRE
Installation Instructions
Fig. 4
6
Step 6:
• Take one of the provided handles and position it
over the handle mounting studs, so that the open
portion is toward the top of the unit.
• Use provided Allen wrench to tighten the set screws
in the handles, securing it to the handle mounting
studs. Fig. 4
• Repeat for the opposite handle.
Step 7:
• Test the unit by opening and closing multiple times,
ensuring it opens and closes smoothly.
• Remove protective film from the surface of the unit.
Step 8:
• To install the bag hook, measure up 44" from
finished floor in the desired location and mark the
wall. Fig. 5
• Position the bag hook on the wall so that the top of
Fig. 5
the mounting plate is level with the 44" mark.
• Position the bag hook over a wall stud for optimal
strength.
• Mark then predrill the mounting holes.
• Use the provided screws to secure the bag hook in
position, then take the escutcheon plate and screw
it over the mounting plate to cover the mounting
Fig. 6
screws. Fig. 6
*Diagrams are not to scale.