Picture Format; Television Mode - Medion Pure Retro Mode D'emploi

COLOUR
. Press button [ " ] and the colour saturation is increased.
. Press button [ A ] and the colour saturation is reduced.
Inputs / PIP >
Picture >
Contrast:
Display >
Brightness:
Sound >
Picture sharpness:
Setting >
Colour:
Info >
DNC:
Photo CD:
←
Menu option <DNC> is "Dynamic Noise Control".
Weak TV signals or poor video signals can generate disturbing picture noise. DNC dynamically adapts the effect of the
digital noise suppression to the picture content.
The menu option <PHOTO CD> is specifically for the reproduction of still pictures, e.g. photo CDs or picture CDs.
. Set the menu option <PHOTO CD> to "On" and still pictures will be displayed automatically in best quality.

PICTURE FORMAT

D Auto zoom
This function evaluates the current picture format and switches automatically between "FULL PICTURE" and
"4:3 LETTERBOX ON 16:9".
In the menu option <DISPLAY ' FORMAT> you can select the preset picture formats. Manual format selection is possible
only if "Off" is set in the menu option <AUTO ZOOM>.
D Panorama
This format setting scales the input signal automatically in horizontal and vertical directions so that it is screen-filling,
but not linearly, i.e. the picture contents in the centre of the screen are displayed as the original and towards the edges
more intense scaling takes place.
D Normal (4:3)
This format setting displays a PAL 4:3 picture with the correct side ratio. Dark stripes are visible on the left and
right-hand edges of the picture.
D Full picture
In this format setting the picture is adapted in horizontal and vertical directions so that a full screen display is always
visible.
D User zoom
If you select user zoom, the menu option <USER ZOOM> is displayed in the menu.
In this menu option you can display an individual picture format in the range 40 % to 160 % of the original picture size.
Setting is performed in jumps of 6 %.
D 4:3 letterbox on 16:9
This mode displays a PAL 16:9 picture so that no dark stripes are visible along the top or bottom edges of the picture.
PAL 4:3 pictures are converted to the full horizontal resolution. Due to the additional scaling in vertical direction some
of the vertical picture content is not displayed symmetrically at the top and bottom edges of the screen.
To change over the formats, repeatedly press button [F
Inputs / PIP >
Picture >
Display > Auto zoom
Sound > Format
Setting > User zoom:
Info > Colour temperature:
Contrast:
Still picture
User colour temperature
←
5.4

Television mode

The display is in standby mode.
. To switch on, press one of the numeric buttons [0...9] or the [TV] button on the remote control.
During initialization the company logo is displayed.
18
64
64
15
5
Off
].
Off
: User zoom
This menu option is displayed
only if "User zoom" is set in
User
menu option <FORMAT>.
Normal
"
>
These menu options are not available in
the settings <INPUTS/PIP ' SOURCE>
"PC(RGB)" and "PC(DVI)!
These menu options are
available only with the setting
<INPUTS/PIP ' SOURCE>
"PC (RGB) / PC(RGB)" !
User zoom
Panorama
Full screen
Normal (4:3)
4:3 Letterbox on
16:9
Fill AR
1:1
ENGLISH