Settings For Initial Operation - Medion Pure Retro Mode D'emploi

. To do so select in the main menu the menu option <SETTING> and activate in the submenu the menu option
<CALL DEFAULT SETTINGS>:
Inputs / PIP >
Picture >
Display >
Sound >
Setting > Info signal source:
Info > Language:
OSD settings:
ECO mode/standby:
Call default settings
Sleep timer:
←
4.5

Settings for initial operation

If a DVD player is connected, prior to initial operation it must be ensured that the tuner is selected as the source.
. Press the [TV] button several times.
TV MODE
D Automatic channel search
If you receive your channels via satellite only, you do not have to perform the automatic channel search.
To start the automatic channel search, proceed as follows:
. Switch on the display via the [TV] button on your remote control.
. Call up the OSD menu via the [MENU] button on your remote control and select the menu option
<INPUTS / PIP>. A submenu opens.
. In the submenu select the menu option <SETTING>. The submenu <AUTO. SEARCH> is opened.
. In the menu option <TV STANDARDS> you can enter the TV standard supported for your country -
see table below.
PAL BG PAL I
Austria
Belgium Ireland
Denmark
Finland
Germany
Greece
Italy
Luxembourg
Netherlands
Norway
Rumania
Portugal
Slovenia
Spain
Sweden
Switzerland
Turkey
In the menu option <TV STANDARD> select the setting "Auto". In this way all TV standards are searched for channels.
Please ensure that the channels found are presorted according to the setting in the menu option <COUNTRY>. Before
starting set the channel search for your country.
. Now select the menu option <AUTOM. SEARCH> and activate the submenu option <START SEARCH>.
The automatic channel search starts.
ENGLISH
ON
English
OFF
PAL DK
UK Czech
Hungary
Poland
Slovakia
>
>
> Yes, delete all settings
←
SECAM L SECAM DK
France Bulgaria
Luxembourg Russia
Ukraine
"
13