Connecting And Switching On - Medion Pure Retro Mode D'emploi

4.2

Connecting and switching on

CONNECTION ( for an overview of the connection sockets see the illustration on page 6)
. Insert the mains cable into the mains input socket on the display and the mains plug into a plug receptacle.
D Cable connection / terrestrial aerial
Connection of
TV aerial signal
D Satellite receiver
Connection of
VCR / VTR or
DVD player
SAT tuner
D DVD player with YUV output
Y U V
YUV
LINE IN
Connection of a DVD
player with YUV output
D PC
Connection
of a PC
10
If you would like to connect a cable or terrestrial aerial, use the AERIAL
socket for this purpose.
If you receive your TV channels via satellite, connect your receiver by
means of a SCART cable to the SCART 1 or SCART 2 socket.
In addition SCART 1 has a connection socket for RGB sources,
e.g. DVD player.
Only a SCART 2 can be used for connection of a decoder.
For connection of a DVD player or another video source to a YUV-output
please use the display's YUV-input.
Use the PC DVI-I socket to connect your PC to the display. If your PC has
an analogue VGA output port, use the supplied connecting cable DVI-I on a
15 Pin HD-Sub for connection.
On older PC graphic boards it can happen that pin 9 is barred.
Should this be the case, please contact the service hotline.
ENGLISH