Computer Instructions; Button Functions; Manual Mode - Dutch originals K8501P Mode D'emploi

COMPUTER INSTRUCTIONS

POWER ON
Make sure the power adapter is connected to the device. The computer will
start in auto scan mode.
POWER OFF / SLEEP MODE
The computer will automatically enter sleep mode. To power off, pull the
power adapter jack from of the device.

BUTTON FUNCTIONS

ENTER button:
1. Cycle through data fields.
2. Confirm value.
3. Hold enter to reset and return to scan mode.
UP and DOWN button:
1. Change Time (0:00-99:00 min)
2. Change Program (P1-P11)
3. Change Level (1-8)
4. Set Target Pulse (P11 only)
SCAN MODE
The computer will cycle through the following data fields when powered on:
TIME, RPM, SPEED, DIST, CAL, WATT, PULSE.

MANUAL MODE

To manually select data fields press the ENTER button.
DATA FIELDS
Display Data field on the display
SCAN
TIME
RPM
SPEED
DIST
CAL
WATT
PULSE
PROGRAMS
When the power is on, you can adjust the program (P1-P11) by pressing the
UP and DOWN button. Press the ENTER button to accept a program. You can
adjust the TIME value (default 20:00 min) of a program by pressing the UP
and DOWN button.
Programs
Program 1
Program 3
Program 5
Program 7
Description
Program 9
Cycle through
data fields
Program 11 (Heart Rate Control)
Time in minutes
To set a Target Pulse, enter program 11 and set the data field on PULSE. You
can now manually set a Target Pulse using the UP or DOWN arrows. Press
ENTER to confirm. The computer will alert you by making a sound when
Rounds per minute
exceeding the target value by approximately 10 BPM.
LEVELS
During exercise, you can manually adjust the level of resistance (1-8) by
Speed in km/h
pressing the UP and DOWN button.
Distance in km
Calories in kcal
Wattage in Watt
Pulse rate in beats
per minute
Program 2
Program 4
Program 6
Program 8
Program 10