Agitator Assembly; Removing Clogs - Panasonic MC-UG583 Manuel D'utilisation

Agitator
Holder
Filter
End Cap
E-Clip
Hose
Tuyau
Manguera
Cover (Suction Inlet)
Couvercle
(Entrée d'aspiration)
Cubierta
(Abertura de aspiración)
+
Hose Fitting
Raccord du tuyau
Conexión para manguera

Agitator Assembly

Spacers (3)
Brushes
Shaft

Removing Clogs

Short Hose
Tuyau court
Manguera corta
Short Hose
Tuyau court
Manguera corta
- 36 -
Brush
Agitator
Pulley
The hose located on the back of the
vacuum cleaner carries the dirt from the
nozzle up to the dust bag. If the hose
should become clogged:
Unplug vacuum cleaner.
Pull open suction inlet cover and
check for clogging.
Disconnect wand from short hose
and check wand and hose.
Plug in vacuum cleaner and turn on.
Disconnect wand and stretch hose in
and out to remove clog.
If clog still exists, turn vacuum
cleaner OFF and UNPLUG POWER
CORD.
Remove lower plate.
Remove short hose from nozzle by
lifting straight up.
Inspect hose end and clear any
obstructions.
Reinstall short hose and lower plate.
Filter
End Cap
Spacer