Zephyr Tempest I Guide D'utilisation page 21

ZEPHYRONLINE.COM
Horizontal Ducting Conversion
Tempest I Use, Care, and Installation Guide
Installation Instructions
6. Attach blower to hood body
from the back of hood using (4)
previously removed blower screws
and reconnect blower plug.
7. Attach 8" round duct collar or 3
1/4" x 10" rectangular duct collar
to back of hood body using (4)
M3.5 x 8 screws.
8. From inside hood body, position
top cover plate to top of hood
body. From outside hood body,
attach top cover plate to top of
hood body using (4) 3/16" x 3/8"
screws.
21