Zephyr Tempest I Guide D'utilisation page 18

Installation Instructions
Mounting the Hood
For Mounting to a Wall (FIG. C)
1. Select preferred duct location (vertical or
horizontal).
2. Begin installation by removing the baffle filters.
3. Temporarily position the range hood in the
desired mounting location. Measure and
mark the mounting holes, duct and electrical
locations with a pencil.
4. Drill/cut out required openings.
5. Fasten hood onto wall with screws provided.
6. Install electrical.
7. Install duct work and duct tape.
8. Reinstall baffle filters.
9. Power up hood and check for leaks around
duct tape.
18 Tempest I Use, Care, and Installation Guide
T E M P E S T I
U N D E R - C A B I N E T
2. Baffle
filters
FIG. C
P R O