Réglage de la plaque de diffusion
Certaines configurations d'évent nécessitent le réglage de la plaque de diffusion (reportez-vous aux
tableaux de configuration d'évent approuvés pour plus de détails). La position #1 est stock (pliée). La
position n #2 est aplatie. Voir les instructions ci-dessous pour changer le diffuseur en position n #2.
DIFFUSER SIDE VIEW
Before (Stock - Position # 1)
After (Position # 2)
© Travis Industries
Installation
(for qualified installers only)
3/18/2019 – 1491-FR
Remove the exhaust restrictor.
NOTE: These obround holes allow for the
restrictor to be removed with the screws still in
place.
1/4" Nutdriver
Remove the diffuser.
1/4" Nutdriver
Bend the round portion of the
diffuser so it is flat (position # 2).
Secure the flattened diffuser plate with the
screws removed earlier.
Replace the exhaust restrictor (see "Exhaust
Restrictor Adjustment" for restrictor
settings).
27
564 GSR2 25K