Charger Features; Battery Features - Littium BERLIN Manuel D'utilisation Et Garantie

ChARGER FEATURES

INPUT: 100-240V – 1.8A
OUTPUT: 42V – 2.0A (FAST)
TOTAL LENGTh OF WIRING: 2.80 M

BATTERY FEATURES

SAMSUNG LI-ION
OUTPUT: 36V
CAPACITY: 10.4A
WEIGhT: 2.5 KG
Attention
PRECAUTIONS WITH THE BATTERY
• You can charge the battery when inserted in the E-Bike.
• In case you decide to remove the battery from the E-Bike, avoid touching any of its contacts and keep it
away from children.
• Only use the charger that is included in the package. If you need a new charger, get in touch with your
local distributor.
• Do not try to open or repair the charger.
• Avoid spilling liquids on the charger and be careful not to strike it.
• Do not place objects on top of the charger while the battery is charging. It needs to be well aired so that
the generated heat can dissipate.
• If there is strange smell or the temperature is too high when charging, please stop charging immediately.
• To avoid premature battery wear and the loss of the warranty, the battery should be charged and dischar-
ged at least once every three months.
• Do not use the battery when it is almost flat.
• When in extreme temperature conditions, it is common that the capacity of the battery decreases.
• Do not leave the charger connected to the battery for more than 10 hours.
• The lack of use of the battery produces a deterioration in the lithium. We recommend you keeping it at a
50% of charge when not using it for long periods of time. Otherwise, it will be left out of warranty.
ENGINE FEATURES
DC PERMANENT MAGNET BRUSHLESS
BRUSHLESS TYPE
NOISE: ≤ 62DB
POWER: 250W
REVOLUTIONS: 235R/MIN
VOLTAGE: 36V
EFICCIENCY: 90%
!
49