Assembling Your E-Bike For The First Time - Littium BERLIN Manuel D'utilisation Et Garantie

Assembling your E-Bike

Assembling your E-Bike for the First Time

If you do not have basic mechanical notions, it is advisable to visit a competence centre.
01. Before getting started, make sure the battery is off.
02. Secure the E-Bike on its stand.
03. Assemble the handlebar ensuring that is centred. Once in position, adjust it to the upper part
using two Allen screws. Use the tool provided in the packaging to do so.
04. When adjusting the direction of the steering post, make sure it is properly aligned with the
handlebar. Then, tighten the two side screws to the base of the steering post.
05. Once you have adjusted the handlebar to your desired height, secure it by tightening the
Allen nut.
HEIGHT ADJUSTMENT
SIDE SCREWS
41