Archos 35 Mode D'emploi page 13

HANDSET REGISTRATION
You can connect another ARCHOS handset to your ARCHOS DECT base.
Registering an ARCHOS handset with an ARCHOS DECT base during the startup wizard
If your ARCHOS handset is not connected to an ARCHOS DECT base, you will have
the option to connect it during the startup wizard.
When you reach the DECT Setup step:
1. Plug out the DECT base AC adapter from the wall outlet.
2. On your ARCHOS handset, tap Register with ARCHOS base.
3. Tap Register and plug in right after the DECT base AC adapter.
The device attempts to connect to the ARCHOS DECT base.
When the registration is successful, the ARCHOS handset number is displayed in the
status bar.
Registering an ARCHOS handset with an ARCHOS DECT base from the settings
1. Plug out the DECT base AC adapter from the wall outlet.
2. On your handset home screen, tap Settings > Phone > Registration.
For the requested pin number, you do not need to enter anything.
3. Tap directly Register and plug in right after the DECT base AC adapter.
The device attempts to connect to the ARCHOS DECT base.
When the registration is successful, the handset number is displayed in the Status
bar.
13