Securing Child - Joie spin 360 GT Manuel D'utilisateur

Securing Child

1. Press the webbing adjustment
button -1, while pulling out the
24
shoulder harnesses to the proper
length. -2
24
2. Unlock the buckle of the
harnesses by pressing the red
button.
25
3. Fix the buckles on each side of
the seat to make placing the child
more comfortable. 26
4. Please use the infant insert for the
best protection of the child.
17
24
2
1
25
26
27
27
Detach the snaps on
the head support to
remove the head
portion of the insert.
We recommend using the full
infant insert while the baby
is 0-6 months or until they
outgrow the insert. The infant
insert increases side impact
protection.
5. Place the child into the child restraint and pass both arms through
the harnesses.
!
After the child is seated, recheck whether the shoulder harnesses
are at the proper height.
6. Engage the buckle. Please refer to
28
Remove the head support
portion of the infant
insert when the child's
head no longer fits
comfortably.
Remove the body
portion of the infant
insert when the infant's
shoulders no longer fit
comfortably.
Remove the infant insert
1
cushion by detaching the
snaps to allow more space
when the infant does not
fit comfortably. The
cushion
can be used separately
2
without being attached to
the insert to bolster the
infant's back for more
comfort.
28
18