Securing Child - Joie i-Spin 360 E Mode D'emploi

Securing Child

1. Press the webbing adjustment
button, while pulling out the
shoulder harnesses to the desired
(Pull from below the fixed
shoulder pads to lengthen) length.
27
2. Unlock the buckle of the
harnesses by pressing the red
button.
28
3. Fix the buckles on the both sides
of the seat shown as which
29
located on the both sides of seat
to make placing the child in rear
facing mode more convenient.
19
27
28
29
4. Place the child into the enhanced child restraint and pass both arms
through the harnesses.
!
After the child is seated, recheck whether the shoulder harnesses
are at the proper height.
5. Engage the buckle. Please refer to
30
6. Pull down the adjustment
webbing and adjust it to the
proper length to make sure your
child is properly secured.
31
!
Always keep child secured in
harness and properly tightened by
removing any slack.
30
31
20