Cleaning And Maintenance - Philips PowerTouch 5000 Série Mode D'emploi

English
14

Cleaning and maintenance

Never use compressed air, scouring pads, abrasive
cleaning agents or aggressive liquids such as petrol
or acetone to clean the shaver, the charging stand
(specific types only) and the Jet Clean System
(specific types only).
- The best and most hygienic way to clean the
shaver is in the Jet Clean System (specific types
only). You can also rinse the shaver under the tap
or clean it with the cleaning brush supplied.
- Clean the shaver after every shave for optimal
shaving performance.
- Regular cleaning guarantees better shaving
performance.
- For the best cleaning results, we advise you to use
the Philips Cleaning spray (HQ110) and (specific
types only) the Jet Clean solution (HQ200).
- Be careful with hot water. Always check if the
water is not too hot, to prevent your hands from
getting burnt.
Note: Water may leak from the socket at the bottom
of the shaver when you rinse it. This is normal and not
dangerous because all electronics are enclosed in a
sealed power unit inside the shaver.