Video Problems - DigiSender Plug'n'Go LCD Série Mode D'emploi

ENGLISH (UK)
DX2000-LCD - DigiSender® Plug'n'Go™ LCD - Single Input 5.8GHz Wireless AV Sender System
Troubleshooting

Video Problems

The picture is present but
poor quality...
POOR RANGE
1. The picture & sound quality
is affected by the Transmitter
and Receiver's location. Try
positioning them in different
locations. The Transmitter and
Receiver should be connected
to a mains extension lead that
can be moved.
2. Try the other 3 available Au-
dio/Video channels ensuring
that the Audio/Video Channel
setting is the same on both
the Transmitter and Receiver.
3. Ensure the units are within
the usable range, normally
this would be 40m when pass-
ing through 2 average internal
walls. Thicker or stone/granite
walls may lower the usable
range of this device.
Page 10
What do you see on the second TV?
I see a black screen...
Switch OFF your DigiSender® TRANSMITTER.
What do you now see on the second TV?
I still see a black screen...
WRONG AV CHANNEL
SELECTED
1. Switch the Transmitter back
on.
2. Ensure the correct SCART
channel is selected on your
second television. Some
televisions feature multiple
AV channels for one or more
SCART, phono and S-Video
inputs.
3. If available try another
SCART socket on the second
television.
Please read the instructions carefully prior to installation
I now see a snowstorm or
blue screen...
RECEIVING BLANK SIGNAL
1. Switch the Transmitter on.
2. Ensure the Transmitter is
connected to your source de-
vice (such as your Satellite,
Cable, Freeview, DVD or VCR).
3. Ensure that your source de-
vice is switched on.