Technical Data - Beurer medical FT 60 Mode D'emploi

The device must not be stored or used at too high or low a temperature or humidity (see 9. technical data), in sunlight, in
association with an electrical current or in dusty locations. Otherwise, inaccuracies can occur.
If prolonged storage is intended, you should remove the battery.
Please dispose of the device in accordance with the directive 2002/96/EG – WEEE (Waste Electrical and Electronic
Equipment). If you have any queries, please refer to the local authorities responsible for waste disposal.

9. Technical data

Note: When the device is used outside the specifications, perfect functioning cannot be guaranteed.
We reserve the right to make technical changes to improve and develop the product.
Model
Measurement range
Laboratory measurement
precision
Interval between 2 measurements
Measurement units
Ambient operating conditions
Storage conditions
Dimensions
Weight
Battery
Memory
Explanation of symbols
FT 60
Forehead thermometer mode: 34 °C to 42,2 °C (93,2 °F to 108,0 °F)
SCAN mode: -22 °C – 80 °C (-7,6 °F – 176 °F)
Forehead thermometer mode: ±0,3 °C (±0,5 °F) from 34 °C to 42,2°C (93,2 °F to 108,0 °F)
SCAN-Modus: ±0,3 °C (±0,5 °F) from 22 °C to 42,2 °C (71,6 °F to 108 °F)
±2 °C (±4°F) with >42,2 °C and <22 °C (>108 °F <71,6 °F)
At least 5 seconds
°Celsius (°C) or °Fahrenheit (°F)
10 °C to 40°C (50°F – 104°F) with a relative humidity of 95% (non-condensing)
-20 °C to 50 °C (-4 °F – 122 °F) with a relative humidity of up to 95% (noncondensing)
34 x 145 x 28 mm
57 g including battery
1 lithium battery (type 3V CR-2032)
For 9 measurements
Device classification type BF
Please read the instructions for use
18