Hewi PS160XA10 Notice De Montage page 11

Maintenace
The panic device must be checked monthly to ensure
it is properly fixed and to ensure easy movement. If
necessary, the screws must be retightened and the
moving parts must be oiled. Ensure the bolt heads are
not blocked.
Care tips
HEWI products are easy care. In general occasional wi-
ping with a damp cloth suffices. However, if you want to
use a cleaning agent you should note the following: Use
cleaning agents with a ph-value between 6 and 8 only.
Cleaning agents containing detergent substances such
as phosphates, soaps and tensides (surfactants) can be
used. You may not use: Alkali or acidic cleaning agents
or cleaning agents containing chlorine or scouring agent
additives. Also avoid using abrasive instruments, e.g.
brushes.
All cleaning agents must be used in accordance with
the manufacturer's instructions for use (concentration,
exposure time).
Otherwise the surfaces of the HEWI products can be
attacked and damaged. No warranty whatsoever is pro-
vided for damage caused by improper handling.
If you have any questions, please contact HEWI
Hardware Support, Tel. +44 1634 377688.
Panic bar PS160XA/PS111XA
Tools
Drilling template
PS160XA10, PS160XA20,
PS111XA10, PS111XA20
Item number: 55301
Stop dimensions framed and leaf doors
Select fixing points according to lock type and fitting.
Optimum -> choose the largest centre-to-centre
measurement.
Leaf doors -> 46 / 21,5
Framed doors, freely se-
lectable depending on
lock type.
Dimension e = depending
on lock manufacturer
Leaf
Framed door
door
Important information
BKS
PS160XA30, PS160XA40,
PS111XA30, PS111XA40
Item number: 64302
Leaf doors -> 33 / 21,5 /
21,5
Framed doors -> 33 / 21,5
Dimension e = depending
on lock manufacturer
33
Leaf
33
21,5
Framed
door
door
21,5
21,5
HEWI | 11