Westfalia Automotive 307 284 Notice De Montage Et D'utilisation page 8

GB
If a shackle-type towing attachment is to be used without injuring the person using it or damaging the
vehicle, it is essential that there is adequate clearance between the hand lever and other vehicle
components. The clearances quoted in sketch 1 are adequate.
Sketch 1:
Parts of Towing bracket
Description
Towing bracket including ball plate and spacer
Mounting and operating instructions
Securing components:
Hexagon bolt M12x100; strength class 8.8
Hexagon bolt M16x115; strength class 8.8
Hexagon bolt M16x50; strength class 8.8
Hexagon nut M 12
Shackle mounting towing bracket
Shackle mounting spacer
Hexagon nut M16
Washer 17
Washer Ø32x10,5x5
Hexagon bolt M10x40; strength class 10.9
Hexagon nut M 10
Spacer
x = Content of Mounting Parts No.: 907 284 650 001 (standard)
xx = Content of Mounting Parts No.: 907 190 650 002 (for mounting automatic coupling - not part
of standard part - washer 32 x 10.5 x 5 also when using change system.)
8
Qty.
1
1 x
6 x
2 x
2 x
6 x
6 x
2 x
4 x
4 x
4 xx
4 xx
4 xx
1 x