General Installation Instructions - Westfalia Automotive 307 284 Notice De Montage Et D'utilisation

When driving with a trailer, observe the driving instructions in the vehicle manufacturer's operating
instructions.
The trailer must be equipped with an appropriate towing coupling ball.
If installing the towing bracket necessitates the removal of the towing eye, the towing bracket serves
as a replacement, provided the permissible towed weight is not exceeded and the towing takes
place on normal roads.
The fixing points specified as standard must be observed.
National guidelines concerning official approval of auxiliaries must be observed.
These installation and operating instructions must be enclosed with the vehicle papers.

General Installation Instructions:

If present, remove insulating compound and/or underseal in the area of the towing bracket contact
surfaces. Coat bare bodywork with anti-corrosion paint.
Retighten all mounting bolts of the towing bracket after approx. 1,000 towing km.
This towing bracket including all mounting parts weighs 18 kg. Please take into account that the
curb weight of your vehicle is increased by this amount after mounting the towing bracket.
Ball position:
"A" = Typ: EAS
Typ: EDS
Typ: ESS
Typ: EBS
Typ: EUS
Typ: EAL
Typ: EDL
"B" = Typ: EAS
Typ: EDS
Typ: ESS
Typ: EAL
Typ: EDL
Typ: EGL
"C" = Typ: EMS
Typ: ENS
FT 80 , FT 100
FT 80 , FT 100
FT 100
FT 8 / 9
FT 100
FT 100 L
FT 100 L
FT 150
FT 150
FT 150
FT 100 La , FT 150 L , FT 190
FT 100 La , FT 150 L
FT 100 L , FT 150 L
FT 120 , FT 150
FT 120
GB
7