Westfalia Automotive 307 284 Notice De Montage Et D'utilisation page 6

GB
Installation and Operating Instructions
Towing bracket
Westfalia Order No.:
Type:
EC Approval No.
as per Directive 94/20/EC:
Application:
EC Authorised Designation: EAS, EDS, ESS, EBS, EMS, ENS, EUS, EAL, EDL, EGL, ECL,
Note: Ball plates and spacers which bear no special marking are part of the approved
parts of the towing bracket and must be compared with the illustration of the
installation and operating instructions.
The automatic coupling including the change plate are also contained in the
approved parts.
Technical Data:
The tested D-value is 14,47 kN. This corresponds, for example, to a towed weight of 2550 kg and
a permissible total weight of 3500 kg. The tested trailer nose weight is 100 kg. For driving, the data
of the vehicle manufacturer with regard to the towed weight and trailer nose weight are decisive,
whereby the tested values of the CBB may not be exceeded.
Notes:
The towing bracket is provided with the ball plate and spacer, as shown in the illustration, as
standard equipment (ball position A, B, C).
However, an automatic coupling may also be mounted instead.
The ball plate and automatic coupling may also be combined (without spacer) in conjunction with
a quick-change coupling system (Part No. 329 064 600 001).
When using the quick-change system, ball plate Part No.: 329 062 600 001.
The towing bracket is a safety part and may only be mounted by specially trained personnel. Should
spare parts be required, these may also only be mounted on the undamaged original-equipment part
by specially trained personnel.
No changes or modifications to the towing bracket are permitted.
The ball and coupling must be kept clean and greased.
Check the ball diameter from time to time.
As soon as a diameter of 49.0 mm is reached at any given point, the CBB may no longer be used
for safety reasons.
6
307 284
307 279
e13 00-1013
Van, Estate Car, Estate Van, Minibus, Single-Cab, Dual-Cab,
Nugget, Estate Lorry
ESL, ESG, EBL