Environmental Aspects; Disposal Of Packaging And Appliance - ETNA AKV378IRVS Mode D'emploi

ENVIRONMENTAL ASPECTS

Disposal of packaging and appliance

This appliance is made from sustainable materials. This appliance must be disposed of in a
responsible manner at the end of its service life. Contact the local authorities for information
about the method.
See also the 'Disposal' chapter in the Safety instructions.
The packaging of the appliance is recyclable. The following materials may have been used:
• Cardboard.
• Polyethylene film (PE).
• CFC-free polystyrene (hard PS foam).
These materials must be disposed of in a responsible manner and in accordance with
government regulations.
EN 34
The appliance is marked with a crossed out wheeled bin symbol to
draw your attention to the requirement for the separate disposal of
domestic electrical appliances. This means that the appliance may not
be disposed of in unsorted household waste
at the end of its service life. The appliance must be taken to a special
municipal waste processing location for separated waste or to a dealer
who provides this service.
Collecting and disposing of domestic appliances separately avoids
detrimental consequences for humans and the environment. This
ensures that the materials used to make the appliance
can be recovered and that substantial savings in the use of energy and
raw materials can be achieved.
Declaration of conformity
We hereby declare that our products conform to the applicable
European Directives, Regulations and requirements, as well as all
requirements in the standards to which reference is made.